Several points to pay attention to when using shelves and pallets

　　1. Plastic pallets should be handled gently to avoid uneven force and damage when landing.

　　2. When placing goods, they should be evenly placed to avoid tilting during lifting and transportation.

　　3. When using handling equipment, consideration should be given to whether the size of the cargo difference is suitable for the use of this plastic pallet to avoid improper dimensions that may damage the plastic pallet.

　　4. When using stacking, the load-bearing capacity of the bottom pallet should be considered.

　　5. When working with forklifts or manual hydraulic trucks, the forks should be placed as close as possible to the outside of the pallet fork hole, and all forks should extend into the pallet. The angle can only be changed after lifting the pallet smoothly. The fork should not strike the side of the tray to avoid causing it to break or crack.

　　6. When placing pallets on shelves, shelf type pallets must be used, and the carrying capacity depends on the shelf structure. Overloading is strictly prohibited.

Read recommendations:

MZG Wire Storage Shelving 3-Tier, White

stainless steel wire rack manufacturer

What are the uses of large shelves produced.wire closet shelf covers