Elements to understand when customizing shelves.metal TV stand for 60+ inch TV

　　1. Warehouse area and height

　　Firstly, it is important to determine the length and width of the warehouse where shelves need to be placed. Then, the square of the length and width can be used to determine the type of shelf based on the height of the space. Common types of shelves include loft shelves and crossbeam shelves

　　2. Load bearing requirements

　　It needs to be determined based on the type and weight of stored goods, usually calculated per square meter. If the weight of goods stored usually ranges from 250-280kg, a load-bearing capacity of 300kg/square meter can be chosen

　　3. Access method

　　There are two ways to access the warehouse: manual access and forklift access. If it is forklift access, the turning radius needs to be known and the aisle needs to be reserved

　　4. Bedding material

　　The upper layer of the attic platform is paved with steel plates and wooden boards, which should be selected according to local fire protection requirements and enterprise needs

　　5. Building conditions in the storage area

　　After determining the area, width, load-bearing requirements, and access method, it is necessary to arrange the shelf arrangement reasonably based on the on-site fire hydrant fire passage, building columns, doors, passages, and other conditions. In this regard, the manufacturer will go to the site to determine before making a plan.

Read recommendations:

2-Tier Metal Bathroom Shelves Over Toilet / Metal Bathroom Shelves Freestanding / Chrome Metal Wire

storage shelving units distributors

Operating procedures and precautions for crossbeam shelves